- 3HP lifts to: 100m
- 2Hp lifts to: 75m
Structural characteristics:
- 4" rewindable submersible motors , filled with food grade insulating fluid (FDA and CE approved).
- The motor body , lower and upper bracket are made of AISI 304 stainless steel.
- The outer column is made of AISI 316 stainless steel.
- Large size rubber pressure equalization diaphragm .
- NEMA 4" Flat Four Conductor Electrical Cable , Suitable for Use in Potable Water:
- For motors from 0.5 to 3.0 HP: Cable length 2.0 meters
- For motors from 4.0 to 7.5 HP: cable length 3.0 meters
- Triple seal system on rotor shaft: consists of two-way mechanical seal + radial seal + sand guard.
- Single phase motors : PSC (Permanently Split Capacitor) type.
- Direction of rotation :
- Single phase motors: Rotation is clockwise when facing the shaft end.
- Three-phase motors: can rotate clockwise or counterclockwise without any difference.
- All motors are 100% tested.
Operating data:
- Capacity :
- 0.5 to 3 hp (0.37 to 2.2 kW) for single phase motors.
- 0.5 to 7.5 hp (0.37 to 5.5 kW) for three-phase motors.
- Rotation speed : about 3500 rpm.
- Operating voltage :
- 220 volt single phase.
- 220V/380V/460V three phase.
- Voltage change : Max +6%, Min -10%.
- Frequency : 60Hz / 2 poles.
- Starting system : Direct on line (DOL).
- Number of runs per hour : maximum 20.
- Water temperature : up to 35°C (100°F).
- Horizontal operation : up to 3 hp (2.2 kW).
- Insulation : Class F.
- Protection : IP 68.
- Continuous operation : Yes.
- Cooling flow : minimum 0.8 m/s.
These submersible motors are ideal for applications requiring reliability in underwater operation, such as water pumping systems and are suitable for use in potable water with high protection properties and flexibility in operation.
- Warranty:
- One year maintenance from the agent
